First off for those of you who are unfamiliar with Colloidal Silver (Silver Water), I’ll give you the basic concept: Silver kills germs, viruses, bacteria, and fungi on contact. This is a scientific fact that no one can really deny.
Colloidal Silver is the result of an electro-magnetic process that pulls microscopic particles from a larger piece of silver into distilled water. These very fine microscopic particles can easily penetrate and travel throughout the body.
Colloidal Silver works as a catalyst, disabling the enzymes that all one-celled bacteria, fungi and viruses use for their oxygen metabolism. Basically, the bad guys suffocate.
Unlike with antibiotics, resistant strains have never been known to develop. Antibiotics are only effective against a dozen or so forms of bacteria and fungi, and never viruses. No known disease-causing organism can live in even tiny traces of the elemental silver water, Colloidal Silver. It’s effective against more than 650 different disease-causing pathogens.
There is not enough room to list all the diseases against which Colloidal Silver has been used successfully. Here is a very abbreviated list: acne, allergies, appendicitis, arthritis, blood parasites, bubonic plague, burns (colloidal silver is one of the few treatments that can keep severe burn patients alive), cancer, cholera, conjunctivitis, diabetes, gonorrhea, herpes, leprosy, leukemia, lupus, lymphangitis, Lyme disease, malaria, meningitis, parasitic infections both viral and fungal, pneumonia, rheumatism, ringworm, scarlet fever, pink eye, ears, mouth and throat, shingles, skin cancer, staph infections, strep infections, syphilis, toxemia, and all forms of viruses, warts and stomach ulcers.
Now that you know the background, here is a guide on how to make your own:
What you’ll need:
10″ pure silver wire (.999 fine)
27 volt generator (can be made or purchased)
Dark tinted glass jar
Unbleached coffee filter
1. Curve the top of the electrodes (the two 5 in. silver wires) so that they look like little canes.
2. Hang the wires on top of an *8 oz. jar or glass full of distilled water, with the electrodes protruding into water. The electrodes should be almost completely immersed. Never let the electrodes come into contact with each other, as this will quickly drain the batteries. *(I usually use a 32 oz. mason jar!)
3. Attach the alligator clip from generator to each silver wire, and the process will begin. Sometimes you will see absolutely nothing happen for 45 minutes or more! Believe it or not, the environment (lunar cycles…) affects how long it takes to generate!
It is nearly impossible to standardize colloidal silver. Silver is reactive to a number of natural forces that have yet to be identified. Even when the voltage, the water, and the water temperature are identical, different batches will proceed at different rates on different days. The speed of the reaction can vary by over 100% depending on the day. On “normal” days, the reaction is proceeding well, by 15 minutes, with a visible cloud of particles. On “slow days” it may take 30 minutes or more before any visible production of particles begins. Because of this variation, it is always wise to observe the reaction with a strong flashlight so you can see how quickly the reaction is happening. Once the “cloud” starts forming, time the batch for 5-10 more minutes. This is the best way to standardize your home brewed colloidal silver.
Sometimes I see the “white cloud” begin floating into the water, in 10 minutes or less. Whenever you see the “white cloud” streaming – even a little, from a wire, begin to time it. 10 ppm – 10 minutes. I usually make 10-15 ppm cs. You can shine a flashlight through the water and see the results with the light, sometimes even before your naked eye sees the difference in the water. It reflects on the silver colloids in the water. This may not be standardized, but it is true colloidal silver and it works!!
The solution ranges from virtually clear to yellowish or grayish at the end of the production. I never worry about color, as long as I am sure that all the variables were controlled and I made a true elemental silver colloid.
There are several variables which can cause different processing times, and the batches to come out differently.
• Higher water temperature will accelerate the process. (I always heat mine to very warm before I begin.)
• Any minerals in the water.
• Even phases of the moon can cause the process to vary somewhat (weird, huh?)
Store in the dark or in dark bottles to increase shelf life.